NFPA 142013 EDITIONDECODED

Standpipe & Hose Systems

Practical interpretations, field tips, and real-world stories — not a copy of the standard.

CHAPTERS

TOPICS

⚠

This guide provides practical interpretations written in our own words. It is not a substitute for the official standard. Purchase NFPA 14 at nfpa.org | Standpipe Systems article | Standpipe Flow Test | NFPA 25 ITM Table

Ch. 1

Administration

What NFPA 14 covers, what it hands off, and how equivalencies work

1 topics▼

Ch. 3

Definitions

The vocabulary — system types, classes, pressures, and standpipe anatomy

2 topics▼

Ch. 4

System Components and Hardware

Listed pipe, fittings, valves, hose stations, hose connections, FDCs, and signs

2 topics▼

Ch. 5

System Requirements

Dry-system mechanics, the three classes, which system type is allowed where, gauges, and alarms

3 topics▼

Ch. 6

Installation Requirements

Where the pipe runs, how it's protected, valved, supervised, and signed

3 topics▼

Ch. 7

Design

The engineering core — pressures, outlet locations, sizes, zones, flows, drains, and FDC demand

10 topics▼

Ch. 9

Water Supply

What has to feed the system, and for how long

2 topics▼

Ch. 10

Water Supply Testing

Proving the supply exists before you design around it

1 topics▼

Ch. 11

System Acceptance

Flushing, hydro, flow tests, and the paperwork that proves the system works

2 topics▼

Ch. 12

Buildings Under Construction

Standpipe protection while the building is still going up

1 topics▼

Ch. 13

System Testing, Inspection, and Maintenance

The one-section handoff to NFPA 25

1 topics▼

Want the full standard? Purchase NFPA 14 at nfpa.org

This guide is our interpretation for educational purposes. Always consult the official standard for code compliance.