Hot Work Permit Generator
NFPA 51B — fillable, print-ready permit with fire watch controls
Hot Work Permit
Per NFPA 51B: Standard for Fire Prevention During Welding, Cutting, and Other Hot Work. Valid for one day. Fire watch required during and after work.
0/14 safety checks
1Work Details
Permit #
Date
Start Time
End Time
Location / Area
Building
Floor / Room
Type of Hot Work (check all)
Description of Work
2Personnel
Person in Charge (Supervisor)
Hot Work Operator
Fire Watch (Primary)
Fire Watch (Relief / Second)
3Pre-Work Safety Verification — NFPA 51B §5.4
Mark each item as verified (☑) or N/A. Work may not begin until all items are addressed.
4Fire Watch Requirements
NFPA 51B §5.5: Fire watch is required during hot work and for a minimum of 60 minutes after work stops. Some AHJs (FM Global, many hospitals) require up to 3 hours at high-hazard locations.
Post-Work Fire Watch (min) — default 60
Extended Monitoring after watch (min) — AHJ-specific
5Additional Notes / Controls
6Signatures
Permit Issuer Name
Issuer Title / Role
Operator Name (typed signature)
Fire Watch Name (typed signature)