Construction Compliance Forms
Interactive, fillable permits and inspection forms for healthcare construction projects
Hot Work Permit
Based on NFPA 51B (Standard for Fire Prevention During Welding, Cutting, and Other Hot Work) and OSHA 29 CFR 1910.252. Complete all sections before authorizing hot work.
Permit Information
Personnel
Pre-Work Safety Checklist
All items must be verified before hot work begins. Per NFPA 51B and OSHA 1910.252.
Combustible materials cleared or protected within 35 feet of hot work area(NFPA 51B §7.3)
Trained fire watch person assigned and present with no other duties(OSHA 1910.252(a)(2)(iii))
Fire extinguisher (min. 2A:10B:C) present and verified at work location(NFPA 51B §7.2.3)
Automatic sprinkler system operational in the area(NFPA 51B §7.2.1)
Smoke/heat detector coverage verified — detectors shielded or placed on bypass with notification(NFPA 72 §14.2.1)
Floor openings within 35 feet are covered or guarded(NFPA 51B §7.3.2)
Wall and ceiling openings/penetrations within 35 feet are protected(NFPA 51B §7.3.3)
Adequate ventilation provided for the work area(OSHA 1910.252(c))
Confined space entry procedures followed (if applicable)(OSHA 1910.146)
Operator wearing required PPE (welding helmet, gloves, fire-resistant clothing)(OSHA 1910.252(b))
Supervisor Signature
Date / Time
Disclaimer: These forms are provided as educational tools based on publicly available NFPA, OSHA, TJC, and CMS standards. They are not substitutes for your facility's official permit program. Always follow your organization's specific policies, AHJ requirements, and accreditation standards.